Strategies and Implementation Plans

Key Actions

The Sanitation Strategies and corresponding implementation plans are based on information that is previously collected during the Needs Assessment & Analysis and Prioritisation and respecting and adhering to the Standards Along the Sanitation Service Chain.

Step 1: Set objectives and priorities

Define the target population. Prioritise the elimination of open defecationOpen DefecationPractice of defecating outside in the open environment., followed by a rapid upgrading of access to safe sanitation services covering the full target population. As such, adopt a phased approach when required.

Step 2: Define the activities required to achieve access to safe sanitation services

The type of activities required to deliver access to safe sanitation services, is highly context specific. According to the Faecal Sludge Management terminology factsheet of the Global WASH Cluster, safe sanitation services do not necessarily include the transport and off-site treatment of faecal sludge.

If the following conditions apply, an on-site sanitation facility (like a pit latrine or septic tank) can be considered as safe sanitation, without the need to plan for desludging, transportation and treatment of the feacal sludge off-site:

• The ground water level is 1.5 meter or more deeper than the bottom of the pit or soak pit.
• The latrine or septic tank is 30 meter or more than away from a water source like a well or surface water.
• There is sufficient space to dig a new pit or construct a new septic tank once the used one is full, and equipment, material and knowledge are available to safely decommission and close the old pit or tank.
• People have access to a household latrine

Contexts where above conditions apply, are generally rural.

In othere contexts, where the above-mentioned conditions do not apply, a sanitation service chain is required for safe
sanitation services in emergencies. This means that pit latrines or septic tanks need to be desludged and the collected feacal sludge needs to be transported and treated. This is generally the case in:

• Crowded refugee camps, with no space for new pits once used pits are full and many people use the same toilet or latrine, resulting in short filling-up times.
• Context where the groundwater table is high or where there is a significant flood risk.
• Urban contexts

Step 3: Identify relevant and suitable approaches and technologies to implement the required activities as cost-effective, localized and effective as possible, according to the needs and wishes of your target audience.

Try to support already in-place systems and local service providers as much as possible, instead of implementing parallel systems. A phased approach can also be relevant for Technology identification and selection, Inclusive planning and participation is essential to deliver services (inc designs) that are aligned to wishes and needs of the target audience. Consider Operation and Maintenance needs and  the health and safety of sanitation workers when selecting technologies.

Step 4: Make a realistic time planning and budget

Step 5: Define indicators the measure progress and include a monitoring plan

See Implementation Monitoring

Step 6. Define roles and responsibilities clearly, using Standard Operational Procedures (SOPs)

See Operation and Maintenance. Focus specially on the health and safety of sanitation workers.